Home Hydronic Solutions

Dive into the world of Hydronics with Mr. Heat Mechanical, your reliable partner for efficient heating solutions. Hydronics, a method that uses water as the transfer medium for heating and cooling, offers a comfortable, energy-efficient, and flexible way to control the climate in your home or business. At Mr. Heat Mechanical, we specialize in designing, installing, and maintaining hydronic systems tailored to your specific needs. Explore our services and discover the benefits of hydronic heating and cooling systems. Together, we can enhance the comfort of your space!

Fundamentals of Hydronics

Hydronic systems, a cornerstone of modern heating and cooling solutions, use water as a medium to transfer heat. This introduction to the fundamentals of hydronic systems will guide you through the key components and principles that make these systems efficient and flexible. From heat sources and heat exchangers to control systems and distribution networks, we’ll explore how these elements work together to provide comfortable and reliable climate control.

01

Heat Source

The heat source in a hydronic system is typically a boiler or a water heater, but it can also be a heat pump. The heat source heats up water to a pre-set temperature.

02

Pumps

Pumps are used to circulate the heated water through the system. They ensure that the water reaches all parts of the system and then returns to the heat source for reheating.

03

Heat Exchanger

The heated water is then circulated through a network of tubes or pipes that are connected to heat exchangers. These exchangers can be radiators, in-floor radiant tubing, or heat exchangers for domestic hot water.

04

Control System

The control system regulates the operation of the heat source and pumps, maintaining the desired temperature in the building. It can be as simple as a thermostat or as complex as a building management system.

05

Distribution System

The distribution system consists of all the pipes or tubes that carry the heated water from the heat source to the heat exchangers and back. It is typically made of copper, PEX, or other suitable materials.

06

Expansion Tank

As water heats up, it expands. The expansion tank provides a place for this expanded water to go, preventing damage to the system’s components.

07

Air Elimination Devices

These devices remove air from the system to prevent corrosion and improve efficiency.

08

Dirt Separator

Dirt separator, is used to remove any impurities or debris from the water in the system. This helps to maintain the efficiency of the system and prolongs the lifespan of its components.

How In-Floor Radiant Heating Works?

In-floor heating, also known as radiant floor heating, works by circulating heated water from a heat source, such as a boiler or water heater, through a network of durable, heat-resistant pipes embedded in the floor. As the hot water flows through these pipes, it radiates heat upwards, warming the floor surface and any objects in contact with it. Unlike traditional heating systems that heat the air, in-floor heating warms the entire floor surface evenly, providing a more comfortable and consistent temperature throughout the room. The system is controlled by a thermostat that monitors the room temperature and adjusts the heat output accordingly, ensuring optimal comfort and energy efficiency. At Mr. Heat Mechanical, we specialize in designing and installing these systems, tailoring them to your specific needs. Let’s work together to make your space more comfortable!

Free in-floor heating estimate

How In-Direct Water Heater Works?

Indirect water heating systems, such as those installed by Mr. Heat Mechanical, are an efficient and reliable method for providing hot water. Here’s how they work:

The system begins with a heat source, typically a boiler like the Navien NFB-H. This boiler heats up water to a specified temperature. The heated water is then circulated through a closed-loop water pipe that connects the boiler to the indirect water heater.Though the boiler-fired water never mixes with the water in the storage tank, it circulates through the coils in the heat exchanger, which in turn heat the water for household use. This process is known as heat transfer.

In essence, the boiler does all the work, while the indirect heater merely facilitates the transfer of heat. This efficient system can provide hot water to the fixtures you rely on every day, multiple times a day. At Mr. Heat Mechanical, we specialize in installing and maintaining these systems, ensuring they work seamlessly to provide you with the most efficient and comfortable heating solution. Let’s enhance the comfort of your space together!

Free estimate

The Navien NFB-H series boiler is a high-efficiency condensing heating boiler that offers innovative technology for residential and commercial projects.

Key Features

High Efficiency: The NFB-H series boilers are designed to provide optimal efficiency and cost savings.
Easy Installation: The NFB-H series boilers come with an easy-to-follow installation guide.
User-Friendly Operation: The NFB-H series boilers are equipped with a user-friendly control panel for easy operation.

Free Navien NFB-H Estimate

A combination boiler, or combi boiler, is a high-efficiency system that provides both central heating and hot water within the same compact unit. It heats water directly from the mains when you need it, meaning there’s no need for a separate hot water storage tank.

Now, let’s consider the Navien NCB-H and NHB-H models. The NCB-H is a condensing combi-boiler that offers industry-leading features such as the highest maximum BTU/h for domestic hot water (DHW), the highest flow rate, and a DHW turndown ratio of 15:1. It uses dual stainless steel heat exchangers for heating and has a built-in DHW module for higher performance. On the other hand, the NHB-H series is a line of condensing heating boilers that also have Navien’s advanced burner system, an industry-leading AFUE of 95%, and turn down ratios up to 15:1. These boilers are designed for exceptional heating performance and longevity

How Combi-Boilers Work?

The fuel (natural gas or propane) enters the boiler’s combustion chamber.
An electric ignition ignites the fuel, creating heat.
This heat warms up the primary heat exchanger.
Cold water from your pipes passes through this heat exchanger, getting heated in the process.
This hot water then flows to your radiators or to your hot water taps.
The combi-boiler uses a primary heat exchanger for the central heating and a secondary plate heat exchanger for the hot water, ensuring that the water going to your taps is clean.

When it comes to installation, repair, and maintenance of these boilers, Mr. Heat Mechanical Inc. can be a reliable choice. Based in Richmond Hill, Ontario, they specialize in the sales, repair, and installation of high-efficiency gas furnaces, central air conditioners, gas fireplaces, indoor air quality products, and rental water heaters. They offer a wide range of services and products to meet your home and business needs.Remember, professional installation is highly recommended for these products, and it’s always a good idea to consult with a trusted HVAC contractor like Mr. Heat Mechanical Inc. to ensure the best results

free combi-boiler estimate

Complete Water Heater Installation Services

Are you looking for a water heating and hydronic contractor in Richmond Hill or Toronto? Mr. Heat Mechanical Inc. is the answer to all your heating needs. We are a family-owned and operated business that offers installation and service of water heaters, combination boilers, tankless water heaters and in-floor heating systems. We also provide troubleshooting, maintenance, repair, and upgrade of your existing heating systems. No matter the size or complexity of your project, we have the expertise and experience to handle it.At Mr. Heat Mechanical Inc., we care about quality, safety, and customer satisfaction. That’s why we use only the best materials and equipment, follow the latest codes and standards, and offer competitive pricing and warranties. We also have a team of friendly and professional technicians who are fully licensed, insured, and bonded.When you choose Mr. Heat Mechanical Inc., you can trust that you will receive the best water heating and hydronic service in the area. We offer free over the phone estimates and consultations. Contact us today to find out how we can help you with your heating needs.

click here for water heater

Hydronics FAQs

What's is a hydronic system?

Hydronic systems use a liquid, typically water, glycol, or mineral oil, as a heat-transfer medium in heating and cooling systems. They operate on the principle of heating water and circulating it through a network of pipes to provide warmth.

How does a hydronic system work?

A hydronic system works by heating water in a boiler to a specific temperature range, typically between 140°F and 180°F. This heated water is then circulated through a network of pipes by pumps. The heat from the water is then released into the room through radiators or underfloor heating systems.

What are the components of a hydronic system?

The main components of a hydronic system include a boiler, pumps, valves, and radiators or underfloor heating systems. The boiler serves as the primary heat source, the pumps distribute the heated water, and the radiators or underfloor heating systems release the heat into the room.

What are the advantages of hydronic system?

Hydronic heating systems offer numerous advantages. They are efficient, providing uniform and ambient heating1. They also contribute to better air quality and offer flexible fuel options. Moreover, they can be integrated with smart thermostats for enhanced control and optimized energy consumption.

Is hydronic heating more efficiency than forced-air heating?

Hydronic heating systems are generally considered more efficient than forced-air systems because they minimize energy use and save money. They heat water at a central source and distribute it through a network of pipes, providing consistent and comfortable heat.

How much does it cost to install hydronic heating system?

The cost of installing a hydronic heating system can vary greatly depending on the size of the home, the type of system, and the region. It’s best to consult with a local HVAC professional for a more accurate estimate.

Can hydronic systems be used for cooling as well?

Yes, some hydronic systems can also provide cooling by circulating chilled water through the system.

Contact Us for Hydronic Services

What Our Customers Say About Us?

“I had a combi-boiler installed by Mr. Heat Mechanical Inc. It’s a game-changer! I now enjoy consistent heat and endless hot water. Their team was knowledgeable and friendly. Highly recommended!”

sarah l.

Richmond Hill, ON

“Mr. Heat Mechanical Inc. installed a new boiler and a tankless water heater in my home. Their team was professional and efficient. The new system works perfectly and has significantly improved the comfort of my home.”

john d.

Vaughan, ON

“The team at Mr. Heat Mechanical Inc. serviced our boiler and tankless water heater. They were thorough and took the time to explain everything. I’m very satisfied with their service.”

Mike P.

Markham, ON

“I called Mr. Heat Mechanical for a repair on our boiler and tankless water heater. They exceeded my expectations. The technician was skilled and friendly. I’m very happy with their service.”